Research · Feb – Jul 2023
Electrical data acquisition and supervision over LTE-M
Schneider Electric · Grenoble INP Esisar
An ADS131M08-based acquisition system streaming electrical measurements over LTE-M to MATLAB and Arduino Cloud.

Background#
At Schneider Electric, engineers developing AI algorithms need high-quality data samples. Collecting that data in the field is hard, because field products have limited connectivity.
What I built#
A ready-to-run acquisition system for monitoring electrical parameters such as voltage, current, temperature and noise. It is highly accurate, runs efficiently on battery, and connects to the cloud over narrowband IoT (LTE-M).
The acquired data is analysed with local MATLAB and Simulink tools. The Simulink embedded algorithms then generate C code that is integrated into the firmware, enabling RMS measurements and anomaly detection for various loads.
Firmware and hardware#
- Platform: Arduino MKR NB 1500 (ARM Cortex-M0, SAMD21) with a u-blox SARA LTE-M/NB-IoT modem, and two ADS131M08 8-channel, 24-bit delta-sigma ADCs sampling at 4 kSPS over SPI.
- Firmware: C++ on FreeRTOS, with tasks for ADC sampling and RMS calculation, cloud updates, LED states, debounced push buttons and DAC waveform generation, plus error handling. The new architecture made acquisition and cloud configuration 30% more efficient.
- PCB: designed and fabricated in KiCad.
- Cloud: Arduino IoT Cloud and its API for remote monitoring, data logging and MATLAB access.
Schneider Electric, Eybens, Grenoble, France.

