About
From Chittagong to Grenoble to Tarragona
I am a PhD researcher in AI and robotics at the Institute of Chemical Research of Catalonia (ICIQ) and the Universitat Rovira i Virgili. My project, “AI-Driven Robotics for Catalyst Development” (Spanish national grant 2AID, RAISE subgroup), is building a self-driving lab (SDL) for catalysis: robots, real-time characterisation and machine learning working together in a closed loop. Within it I focus on agentic AI that plans and runs experiments, and on edge embedded AI that brings models onto the lab hardware itself.
I bring 5+ years of hardware and software development. I started as a hardware engineer, and over the last few years I have moved up the stack into firmware, instrument drivers, user interfaces and AI agents, so I can take a lab instrument from PCB to software. I write firmware in C/C++, Python and VHDL for STM32, ESP32, Arduino and Raspberry Pi, from bare metal and RTOS to FPGA and embedded Linux, and I design PCBs with attention to EMI/EMC, signal integrity and testability. I have delivered 8+ projects for startups, research institutes and multinational companies in Bangladesh, France and Spain. Before the PhD I was a Research Software Engineer at ICIQ, automating a high-power photoreactor, and before that I earned an Advanced Master’s in embedded systems at Grenoble INP Esisar and interned at Schneider Electric.
Earlier, in Chittagong, I founded Ahsan’s Lab, a student research group that built more than twenty-five prototypes in robotics, IoT and agri-tech. I am now expanding into machine learning and embedded AI, and I care about startups and innovation that bridge hardware and software. Alongside research, I mentor students heading to Europe through Career Abroad Mentor and built Language Coach for Bengali speakers learning French and Spanish.
Institutions
Where I have studied, researched and worked.
ICIQPhD Researcher · former RSE
URVPhD Researcher
Grenoble INPM.Sc. Embedded SystemsSchneider ElectricElectronic Design Engineer Intern
Premier UniversityB.Sc. EEE
Education & experience
- Nov 2025 – NowEducation
Doctoral Researcher, AI & Robotics
ICIQ (Lloret-Fillol group) · Universitat Rovira i Virgili · Tarragona, Spain
Thesis: AI-driven robotics for catalyst development (Spanish national grant 2AID, RAISE subgroup). Designing an AI-driven autonomous flow photoreactor and a self-driving lab that combines robotics, high-throughput experimentation, agentic AI and closed-loop control. Doctoral School of Nanosystems, Bioengineering and Energy; ICIQ fully funded PhD programme 2025.
- Jun 2024 – Oct 2025Work
Research Software Engineer
ICIQ, Lloret-Fillol group · Tarragona, Spain
Designed the software, protocols and electronics for a 1.2 kW parallel photoreactor: 4-layer STM32F4/ESP32 motherboard and analog control card, Raspberry Pi controllers and touchscreen UIs for operation and intensity control.
- Mar 2024 – May 2024Work
Electrical Engineering Intern
Sanmina SCI · Grenoble, France
Modelled the electrochemical cell equations of an aluminium–air battery in MATLAB/Simulink (simulating up to 2 kW), with state-of-charge, current estimation and thermal models.
- Feb 2023 – Jul 2023Work
Electronic Design Engineer Intern
Schneider Electric · Grenoble, France
Integrated LTE-M and ADS131M08 data acquisition (4 kSPS) on an ARM Cortex-M0, with firmware, PCB and FreeRTOS for acquisition and cloud configuration, 30% more efficient than before.
- Sep 2022 – Aug 2023Education
M.Sc. Integration, Security & Trust in Embedded Systems
Grenoble INP – UGA, Esisar · Valence, France
Embedded security, side-channel and fault attacks. Project: QuadControl, experimental validation of a controller for multiple drones with Qualisys Track Manager. Grenoble INP Foundation International Excellence Scholarship.
- Mar 2021 – Jun 2021Work
Automation Support Engineer
Sincos Automation Technologies Ltd · Dhaka, Bangladesh
Demonstrated Cognex machine-vision systems on industrial visits, operated a Universal Robots UR10, and contributed to machine-vision R&D and project proposals.
- Mar 2019 – Sep 2020Work
R&D Engineer
Robot Company · Chittagong, Bangladesh
Led the design and production of a disinfection chamber, vegetable washing machine, IoT touch switchboard, water pump controller and a humanoid security guard robot.
- Sep 2018 – Aug 2019Leadership
General Secretary, PUC Robotics Club
Premier University · Chittagong, Bangladesh
Gave robotics talks and workshops in schools and colleges, mentored at the IUB Line Follower Contest 2018 and CU Science Carnival 2019, and organised the Robo-Cricket League 2018. IEEE student member (2018–19).
- 2018 – Jun 2024Leadership
Founder, Ahsan's Lab
Ahsan's Lab · Chittagong, Bangladesh
A student research group for robotics, IoT and agri-tech. Now archived; its alumni continue in research and industry worldwide.
- Jan 2015 – Jun 2019Education
B.Sc. Electrical & Electronic Engineering
Premier University · Chittagong, Bangladesh
Thesis: Design and Implementation of a Drain Cleaner Robotic Vehicle.
Skills
Programming
Microcontrollers & platforms
Firmware & OS
PCB & simulation
Protocols
Automation & robotics
Security
Design tools
Outside the lab
Travel, cycling, drone footage and writing. I write stories, travel notes and reflections, many in Bengali, on the blogs page, and share videos and drone footage on YouTube and photos on Instagram.


